Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterPGT Roof Replacement & Installation in Hialeah: What to Know First
If you have a PGT roof system or skylight that needs replacement or new installation in Hialeah, we handle it as an independent PGT service provider, which means we work on your PGT product without being tied to factory pricing or factory timelines. Most roof replacement and installation jobs we take on in Hialeah are completed within one to three days once materials are on site, and we quote the work upfront so you know the number before we start. You are not going to get a lowball teaser price from us. You are going to get a real number, in writing, for a job done right the first time.
This page is for Hialeah homeowners who already own PGT windows, doors, or roof glazing and need replacement or new installation, and for those who are considering PGT for a roof project and want straight answers before they commit. Call (386) 977-5410 and a live person answers. That part is not a recording.
How PGT Products Fail - and How We Fix Them
PGT builds a solid product, and we install a lot of it. But every line has its weak points, especially in Hialeah, where the sun, salt air, and afternoon thunderstorms work on a roof system year-round. Here is what we actually see when a PGT roof installation or replacement call comes in.
- PGT WinGuard frame seal breakdown around roof-set fixed glass. The WinGuard line is common in Hialeah because it is Miami-Dade approved, but we regularly see the factory seal between the glass and frame start to go on roof-set units after 10 to 14 years. The symptom is condensation you cannot wipe off, between the panes. The cause is usually not the glass, it is the frame seal losing adhesion after a decade of Hialeah heat cycling. The fix is a full frame replacement, not a caulk bead over the old seal. Caulk over a failed seal lasts one wet season, and then you are back where you started.
- PGT aluminum frame corrosion at roof curb connections. On PGT roof glazing and skylight curb mounts, we see galvanic corrosion where the aluminum frame meets older steel or galvanized curbs. Hialeah’s humidity accelerates it. The frame looks fine from inside, but the mounting flange is quietly losing material. If caught early, we replace the curb cap and isolate the metals properly. If not, the whole curb needs rebuilding. A homeowner can check for white powdery residue around the base of the frame after a heavy rain. That is the tell.
- PGT sliding roof vent track wear from storm debris. PGT makes roof vents and operable roof windows that use a track system. In Hialeah, the issue is not the track itself, it is the grit that gets into it. Palm fronds, roofing granules, and the fine sand that blows through in dry season grind the roller and track together. The symptom is a vent that gets harder to open and finally binds. The fix is usually a track and roller replacement with OEM PGT parts, and we also correct the drainage channel so water does not pool at the low end.
- PGT EnergyVue glazing stress cracks around roof openings. EnergyVue units on rooftops take a beating from thermal shock, and we have replaced several in Hialeah where a hairline crack starts at a corner and runs. The cause is usually a combination of a too-rigid sealant bed and a rough opening that was not square to begin with. If the opening is not square, nothing else matters. A stress crack that starts at one corner and runs toward the middle almost always traces back to a frame that was forced into an out-of-square opening. We re-set the rough opening, re-square the frame, and the replacement glazing unit goes in without pressure on the corners.
- PGT impact roof glazing interlayer fogging after seal failure. PGT impact product uses a laminated interlayer. When the edge seal fails on a roof-mounted impact unit, the interlayer starts to cloud from the edge inward, and the unit looks milky around the perimeter. We see this on Hialeah homes that had roof glazing installed before 2015. The glass is still structurally sound, but the visibility is gone, and the only real fix is a full insulated glass unit replacement. We quote OEM PGT glass and quality aftermarket side by side, on paper, so you see the exact price difference and warranty coverage before you choose.
Our PGT Roof Replacement & Installation Process
This is how a PGT roof replacement or installation job goes when we run it, from the first call to the last walkthrough.
- 1
Call and schedule. You call (386) 977-5410. A live person answers and sets a time for a technician to come out. No callback form, no voicemail tree.
- 2
Site inspection and diagnosis. The tech arrives on time, in uniform, and inspects the roof opening, the existing PGT unit or curb, and the structural surround. Measurements are taken twice, because a roof opening that is off by 3/8 of an inch decides whether the job is clean or a constant fight.
- 3
Parts and pricing decision, on paper. We lay out the replacement options: OEM PGT parts when warranty coverage or perfect match matters, and quality aftermarket when the budget calls for it. Both are quoted side by side, with warranty durations stated in writing. You decide. No surprise line items later.
- 4
Removal and opening correction. The old unit comes out, and the rough opening gets addressed the way it should have been the first time. We re-flash, re-square, and properly isolate dissimilar metals at the curb, which is where most Hialeah roof installs fail.
- 5
Installation and sealing. New PGT unit or replacement component goes in, sealed with materials rated for South Florida roof exposure. Every fastener, flashing, and sealant line gets checked.
- 6
Test and walkthrough. We run a water test on the seal, cycle any operable vents, and walk you through what was done. Both manufacturer warranty layers are registered in writing before the truck leaves the driveway. The Done Right Promise covers the workmanship from day one.
What PGT Roof Replacement & Installation Costs in Hialeah
Here are ballpark numbers for common PGT roof replacement and installation scenarios we quote in Hialeah. Your exact price depends on the unit size, roof access, curb condition, and whether we are replacing the glass only or the full frame.
- PGT fixed roof glazing replacement, single unit: $800 - $1,600 installed
- PGT operable roof vent replacement: $950 - $2,200 installed, depending on size and track condition
- PGT skylight curb rebuild and new unit: $1,800 - $3,800 installed, depending on curb condition and flashing requirements
- PGT roof glazing seal repair, single unit: $250 - $600, when the frame is sound and only the seal is compromised
- Full roof glazing system replacement, multiple units: $4,000 - $12,000, quoted per opening after site inspection
What moves the price is the condition of the curb and flashing, whether the opening is square or needs re-built, and whether you choose OEM PGT glass or a quality aftermarket unit. We show you both numbers side by side with the warranty coverage on each, and the price we quote is the price on the bill. Call (386) 977-5410 to schedule a free estimate.
Why Hialeah Homeowners Call TruePane Windows & Doors for PGT Work
We have been doing window and door work in South Florida since 2008, and TruePane was founded in 2008 by Dale Kessler, a second-generation glazier who grew up off West 49th Street in Hialeah. The work is personal. Dale still runs the crew with the rule his father taught him: if the opening is not square, nothing else matters. That rule names the company. It governs every PGT roof job we take on.
We are also an authorized installer for more than a dozen lines, so if a PGT unit is not the right call for your roof situation, we quote CGI, CWS, ES Windows, and ECO Window Systems side by side on paper. You see exactly what each one costs and what the warranty says before you spend a dollar. Every job is covered by the Done Right Promise, and a live person answers the phone 24 hours a day, 7 days a week. If something is not right, we make it right. No paperwork fight, no arguing.
FAQs
Replacing a PGT roof unit through an independent PGT service provider does not automatically void your PGT warranty, but using non-OEM parts or improper installation can affect what PGT will cover on remaining components. We are careful to use OEM PGT parts when warranty preservation matters, and we register what needs to be registered in writing before we leave. Call (386) 977-5410 with your warranty paperwork and we will tell you exactly where you stand.
Sometimes, if the existing curb is structurally sound and the corrosion has not gone deep. In Hialeah, with the humidity and salt air, we more often find the curb needs at least a cap replacement. We will show you the condition of the curb during inspection and quote both paths so you can decide with eyes on the actual metal.
Common PGT replacement glass and components are usually on site within five to ten business days. Custom or less common units can run two to four weeks depending on factory and distributor lead times. We give you a realistic timeline on the quote, and we do not start cutting anything until the parts are in our hands and verified.
That depends on the seal condition, frame corrosion, and the age of the unit. If the frame is sound and only the glass or roller track is failing, a repair makes sense. If the seal has failed and the frame is showing corrosion, replacement is usually the cheaper long-term call. We will walk you through the math at the estimate, not after the old unit is out.
It covers the workmanship. If the installation was not done right, we come back and make it right, no paperwork and no arguing. The manufacturer warranty layers are registered in writing with the durations stated, and we hand you that paperwork before the truck leaves the driveway. If something is wrong, call (386) 977-5410. A live person answers.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Hialeah and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.