Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Window Replacement Across Pinewood
Window replacement in Pinewood is governed by one fact most homeowners don’t discover until a contractor points it out: Miami-Dade County requires a Notice of Acceptance (NOA) on every window and door installed here, a product-approval standard stricter than Florida’s statewide system and one that doesn’t apply just across the county line in Broward. That single regulation disqualifies most national big-box window lines before a quote is ever written. TruePane Windows & Doors has worked inside those rules for years, and our crews know Pinewood’s concrete block ranch homes the way only a local company can. Call (386) 977-5410 for a free estimate, and we’ll walk you through what your house actually needs.

Why TruePane Windows & Doors Is Pinewood’s Preferred Window Replacement Company
Dale Kessler founded TruePane in 2008 on a rule that still hangs on the whiteboard: if the pane is not true, the job is not done. That standard matters more in Pinewood than almost anywhere else in South Florida. The housing stock here is dominated by 1950s to 1970s concrete block ranch homes where window frames were cast directly into masonry. Removal means saw-cutting or chipping concrete, not pulling nails from wood. A contractor who treats Pinewood like any other window market will misquote the labor, order the wrong rough opening size, and leave a homeowner with a binding sash by August. We’ve been called in behind those jobs enough times to know exactly what goes wrong.
Every TruePane technician is background-checked and uniformed, and every job is covered by our Done Right Promise backed by The Keystone Standard: both manufacturer warranty layers registered in writing, durations stated, before our truck leaves your driveway. When you call (386) 977-5410, a live person answers. Not a voicemail tree, not a regional call center. We answer the phone because the homeowner who’s been burned once deserves a company that still answers when something needs attention.
Our Window Replacement Services in Pinewood
Full Frame Replacement
On most Pinewood homes built between the 1950s and 1970s, the window is set into concrete block with mortar. A full frame replacement means cutting that old frame out, correcting the rough opening, and setting a new NOA-compliant unit with fresh flashing tape and a clean seal. It is the right call when the existing frame is corroded, the opening is out of square, or the original jalousie hardware is beyond saving. We quote the masonry work honestly because we’ve done it hundreds of times on the same block construction.

Impact-Rated Window Replacement
Pinewood sits in the High-Velocity Hurricane Zone under the Florida Building Code, the most demanding wind-load classification in the state. That means any replacement window needs to carry a Miami-Dade NOA and meet HVHZ standards. We are an authorized installer for manufacturers including, and PGT, and we quote impact-rated lines side by side on paper so you can see exactly what you’re buying and what each product costs before you commit. No sales pressure, no vague upgrades.

Custom Window Sizing
The original 1960s and 70s single-pane sliders and jalousie windows on Pinewood ranches were often mortared into non-standard openings. A modern NOA-rated frame rarely drops into the same hole. We measure every opening twice, then order custom sizing or plan masonry infill where the rough opening doesn’t match any stock unit. This is the step that separates a square deal from a frustrating one, and it’s the step national installers most often skip.

Energy-Efficient Upgrades
Miami-Dade’s combination of heat, humidity, and UV exposure punishes older windows. First-generation impact retrofits installed after Hurricane Andrew in 1992 are now 25 to 30 years old, and many have lost their argon fill between panes. A fogged seal doesn’t just look bad, it kills the window’s insulating value and drives cooling bills up. We replace those aging units with modern low-E, argon-filled frames that meet current NOA standards and hold up to Pinewood’s climate.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Pinewood
We install and service windows from Marvin, Milgard, Jeld-Wen, and Simonton, among others, and we keep local stock for the product families we see most often in Pinewood. Because we work regularly with Miami-Dade NOA product lines, we can usually order and schedule your replacement without a drawn-out approval delay. If you have a warranty claim on an existing window from one of these manufacturers, we’ll help you register the layers correctly and put the fix in writing.
Common Window Replacement Problems We See in Pinewood Homes
Our Window Replacement team has worked enough homes in Pinewood to recognize the failure patterns before we even remove the first window. Here’s what we encounter most:
- Fogged seals on post-Andrew impact windows. First-generation impact units installed in the early 1990s are reaching end of life, and the glazing seals are failing. Argon leaks out, moisture fogs between the panes, and the window’s thermal performance collapses. Replacement is usually the right answer, not glass-only repair.
- Corroded aluminum sill tracks and weep holes. Salt-laden air and intense UV exposure corrode the aluminum frames and clog the drainage paths. Sashes bind, water pools, and the window stops closing square. This is the dominant local failure mode, and it’s a Pinewood-specific problem we’re ready for.
- Non-standard rough openings in concrete block. The old jalousie and single-pane sliders were often set in openings that don’t match any modern stock window dimensions. You can’t order a replacement off the shelf. The right fix involves custom sizing or masonry infill.
- Leaking flashings around original 1960s frames. Homes built during the original CBS boom often had window frames set without modern flashing systems. After decades of storms, the seals break down and water finds its way inside walls. A full frame replacement fixes this at the source.
Our crew spent a morning on NW 89th Street saw-cutting the mortared frames of a 1962 CBS ranch where the original jalousie sliders were cast directly into the concrete block. The rough openings were so irregular that even our stock NOA-rated ViewLux impact units required custom sizing, and we poured masonry infill on two openings before setting the new fusion-welded frames. That added two days but gave the homeowner a true full-frame replacement with new flashing tape and no air leaks. That is the difference between a window swap and window replacement done right.

Pricing for Window Replacement in Pinewood, FL
A full frame impact-rated window replacement in Pinewood typically runs $1,200 to $2,400 per opening, depending on size and masonry condition. Custom sizing for the non-standard rough openings common in this area adds $150 to $400 per window. An energy-efficient upgrade without full masonry work usually lands between $900 and $1,600 per opening. These ranges reflect the reality of Miami-Dade NOA compliance and concrete block construction, and they’re higher than what the same job would cost in a wood-frame market across the county line. We put the price in writing before ordering, and that price does not change with a change order later. Pinewood homeowners call (386) 977-5410 for a free estimate with exact numbers.
We offer a permanent 5% discount for seniors and veterans, a $50 credit on any repair over $250, and a maintenance check. These are standing offers, not seasonal promotions.
We Also Serve Cities Near Pinewood
Besides Pinewood, our crews work regularly in Hialeah, Miami Lakes, Hialeah Gardens, and Medley. The same NOA rules and CBS construction patterns apply throughout this part of Miami-Dade, and we know the neighborhoods well enough to quote accurately the first time. If you’re near the county line and wondering whether your job falls under Miami-Dade standards, call us.
Serving Pinewood, FL - Our Local Coverage Area
We’re based in the Pinewood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Window Replacement in Pinewood
Because Miami-Dade County requires every replacement window to carry a Notice of Acceptance (NOA), a product-approval standard stricter than Florida’s statewide system. Most national big-box window lines are disqualified before a quote is written, which pushes product selection toward higher-quality, impact-rated manufacturers. Add in the concrete block rough openings that need saw-cutting and masonry work, and the labor cost climbs too. You’re paying for local code compliance and local construction reality. Call (386) 977-5410 for a written estimate that breaks all of this down.
You can replace just the glass on some units, but with first-generation impact windows from the early 1990s, a failed seal usually means the entire insulated glass unit has lost its argon fill and the frame’s structural integrity is compromised. Glass-only replacement often costs 60 to 70 percent of a full replacement while leaving a 25-year-old frame in place. We’ll inspect the unit and write up both options with honest numbers before you decide.
We saw-cut or chip out the old mortared frame, measure the rough opening twice, and either custom-order a NOA-compliant unit to fit or pour masonry infill to resize the opening. Every opening gets fresh flashing tape and a clean seal before the new frame is set. This is exactly the kind of work our crews do routinely on Pinewood’s CBS construction, and we quote it accurately because we’ve done it hundreds of times.
Not usually, especially on a standard ranch home. If you’re doing a custom build, a high-end renovation, or specialty glass work like a glass railing system or an architectural feature, we coordinate directly with your architect or designer. We’ve worked on jobs where the lead time on custom millwork and specialty finishes sets the schedule more than the window installation itself, and we’re comfortable managing those long-lead items. Call (386) 977-5410 and tell us what you’re planning.
Because the original 1960s and 70s jalousie and single-pane aluminum sliders were often mortared directly into concrete block openings that were never built to standard dimensions. Builders sized openings to whatever unit was on hand or to rough field measurements, and the mortar made the irregularity permanent. Modern NOA-compliant replacement frames rarely match those old openings, which is why custom sizing or masonry infill is so common on Pinewood jobs. It’s not an upsell, it’s the local reality.
Call TruePane for Window Replacement in Pinewood
If you live in Pinewood and your windows are fogged, binding, leaking, or simply decades past their service life, we’ll measure, quote, and replace them under Miami-Dade NOA standards without the confusion. A live person answers the phone 24 hours a day, 7 days a week. Call (386) 977-5410 to schedule your free estimate, and we’ll put the numbers in writing before any work begins. Done right, the first time.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Pinewood’s window and door needs with a second-generation glazier’s craft standard.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After