Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterCGI Windows & Doors in Hialeah, FL | TruePane Windows & Doors
We service, repair, and replace CGI windows and doors across Hialeah, including the Sentinel Series, Estate Collection, 900 Series vinyl, and commercial storefront lines. We’re an independent CGI service provider, not a factory-authorized dealer, which means we answer to you and Hialeah’s building department, not a manufacturer referral program. The thing that sets our CGI work apart here: we know the Miami-Dade NOA sticker and the concrete anchor pattern behind it are what get your replacement past Hialeah’s own municipal inspection. Call (386) 977-5410 and we’ll take a look.
Why Hialeah Residents Choose Us for CGI Service
Dale Kessler grew up off West 49th Street, a few blocks from Amelia Earhart Park, where his father made him measure twice on garage door frames before he’d let him cut once. That habit stuck. Today he runs TruePane with the same rule on the whiteboard: if the pane is not true, the job is not done. Our crews have spent the better part of two decades fitting impact-rated windows and exterior doors across Miami-Dade, and CGI is one of the lines we know the best. We keep OEM-compatible parts in stock for the most common CGI failure points in this climate: failed EPDM weatherstripping, corroded sill tracks, and worn balance systems on sliders that face the afternoon sun. When you call, a live person answers. Not a voicemail tree, not a callback service. We’ll be there when we say, and we stand behind the work in writing through our Done Right Promise.
Common CGI Windows & Doors Problems We Solve in Hialeah
- Failed EPDM weatherstripping on CGI 900 Series sliders. Hialeah’s summer humidity runs above 80% most days, and that moisture works its way into the glazing channel. The original pressure-glazed seal goes spongy, then it tears. Air leaks in, the AC bill climbs, and the sash starts rattling in the wind. We re-bed the glass with fresh EPDM and reset the glazing bead to the manufacturer spec.
- Corrosion pitting at the sill track corners on older Estate Collection frames. Those factory weep holes do their job until wind-driven rain and leaf litter plug them up. Water sits in the track, salts from the coastal air settle in, and the aluminum starts pitting. We clear the weeps, treat the corrosion, and if the track’s too far gone, we’ll tell you straight and give you a replacement price instead of a repair that won’t last.
- Hairline stress cracks in 900 Series vinyl casements on pre-1960s concrete-block homes. This is a Hialeah-specific problem. The rough opening in those old CBS houses shifts over decades. If the original installer didn’t use the Miami-Dade buck anchors, the vinyl extrusion flexes and cracks at the corners. We see it on the west side of town all the time. The fix usually means pulling the sash and re-anchoring the frame before installing a new one.
- Fog between the panes on Sentinel Series fixed lites. Daily UV exposure breaks down the seal spacer over time. Once the argon escapes and moisture gets in, you can’t dry it out from the outside. We replace the insulated glass unit with a genuine CGI IGU rather than patching a failed seal that will fog again in a year.
- CGI hardware that’s worn past adjustment. Locks, roller assemblies, and hinges on impact doors take abuse from daily use and salt air. We carry OEM-compatible replacements for the most common CGI hardware. If the frame is square and the NOA label is still intact, a hardware swap gets the unit working like new without touching the rough opening.
CGI Service in Hialeah: What Local Conditions Mean for Your Equipment
Here’s the piece of Hialeah reality that never shows up on a generic CGI page: this city falls entirely inside Miami-Dade County’s High-Velocity Hurricane Zone, which means every window or door replacement has to carry a Miami-Dade Notice of Acceptance. Not a Florida Product Approval, not a Broward county sticker. The Miami-Dade NOA. Hialeah’s own municipal building department layers its own permit and inspection on top of the county process, and the inspectors here look specifically for two things: the NOA sticker on the frame and the concrete anchor pattern called out in the product approval documents. Our tech was called to a 1962 CBS home on East 41st Street near Palm Avenue where the owner had three original jalousie windows leaking through the poured-concrete rough openings. We pulled the old louvers, set the openings in concrete, installed CGI Sentinel Series impact casements with 1/4-inch tapcon anchors per the Miami-Dade NOA fastener schedule, and finished with a full-frame buck conversion that passed Hialeah’s own building inspection on the first visit. If the opening isn’t square, nothing else matters. And in Hialeah, if the NOA paperwork isn’t right, the inspector won’t sign, period. We’ve had homeowners show us units bought from Broward suppliers at a deal price, only to find out the sticker wasn’t valid for Miami-Dade. Now they own a window they can’t legally install. We do the paperwork right the first time.
CGI Models & Products We Service in Hialeah
We work on the full CGI residential and light commercial lineup: Sentinel Series impact windows, Estate Collection aluminum impact frames, 900 Series vinyl impact windows, and commercial storefront impact doors. Our Hialeah Door Installation team also handles repair work, installing genuine CGI replacement sashes and hardware whenever the frame is still square and the NOA label is intact. For repair work, we install genuine CGI replacement sashes and hardware whenever the frame is still square and the NOA label is intact. On units 15 years or older with corroded tracks or failed glass seals, we typically recommend full-frame replacement instead of piecing aftermarket parts that won’t hold a Miami-Dade product approval anyway. Parts we don’t stock we can usually have in hand within a few days from CGI’s South Florida distribution, which keeps most Hialeah jobs moving without a long wait. And if you’re weighing repair against replacement, we’ll quote both side by side on paper so you can see the real numbers before you decide.
CGI Service Pricing in Hialeah
CGI repair and replacement costs in Hialeah depend on what you’re working with. A hardware replacement or EPDM re-bed on a Single CGI sash typically runs $180 to $340. A full IGU swap on a Sentinel Series fixed lite runs $280 to $520. Full-frame replacement of a standard CGI impact window in a concrete-block home lands between $900 and $1,800 per opening, including the anchors and buck conversion if needed, and permitting. That’s the honest range, and the variables that move it are the condition of your rough opening, whether you need poured-concrete anchoring, and which CGI line you’re replacing. Your free estimate lays all of this out line by line before you commit. Call (386) 977-5410 and we’ll put it on paper.
Serving Hialeah, FL - Our Local Coverage Area
We’re based in the Hialeah area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - CGI Windows & Doors in Hialeah
No. Hialeah sits inside the Miami-Dade HVHZ, and any replacement window or door has to carry a Miami-Dade Notice of Acceptance. A Florida Product Approval that doesn’t include the Miami-Dade NOA won’t pass Hialeah’s inspection. We check for the NOA label on every unit before we touch the frame, so you don’t end up stuck with a product you can’t legally install. Call (386) 977-5410 if you’re unsure what you have.
Because Hialeah’s pre-1960s CBS homes often have rough openings set in poured concrete instead of wood buck framing, which means the installer has to anchor directly into concrete using the exact fastener pattern from the product’s Miami-Dade NOA. That’s extra labor and material Broward jobs rarely need, plus Hialeah’s own municipal permit and inspection layer on top of the county process. It’s not a markup. It’s the real cost of doing the job so it passes on the first inspection. Call (386) 977-5410 for an exact quote on your openings.
Yes, in most cases. We replace the insulated glass unit with a genuine CGI IGU that matches the original thickness and performance spec. The frame and sash stay in place if they’re still square and the NOA label is intact. If the seal spacer failed from UV exposure and the frame is showing age too, we’ll let you know whether an IGU swap makes sense or whether full-frame replacement is the better use of your money.
It will, provided the units are Miami-Dade NOA-rated and installed per the product approval, including the anchoring and flashing details. Hialeah inspectors specifically look for the NOA sticker and the concrete anchor pattern before they’ll sign off. Once the permit is closed, the wind mitigation inspection is straightforward. We handle the permitting and the paperwork as part of the job.
If the frame is still square, the NOA label is readable, and the corrosion is limited to surface pitting at the sill corners, repair is a legitimate option. If the pitting has eaten through the track or the frame is racked from years of shifting on an old CBS opening, replacement is the honest answer. We’ll put both numbers in front of you and let you decide with real information, not a sales pitch. Call (386) 977-5410 and we’ll take a look.
Service Areas Near Hialeah
Our crews cover Hialeah service area proper plus the surrounding communities where we do regular CGI work, including CGI service in Miami Lakes, CGI service in Hialeah Gardens, Medley, Miami Springs, and Brownsville. If you’re within a short drive of Hialeah, there’s a good chance we already work your street.
Book Your CGI Service in Hialeah Today
If you have a CGI window or door that’s fogging, sticking, corroding, or drafting, call (386) 977-5410. We’ll schedule a free estimate, put the numbers on paper, and walk you through what your Hialeah home actually needs. We stand behind the work in writing. Live person answers, any hour.
Written by Dale Kessler, Owner at CGI sales & service, serving Hialeah since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.