Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterAndersen Door Installation in Hialeah: What to Know First
We install Andersen doors in Hialeah as an independent Andersen service provider, and most installations are completed in a single visit once parts are on hand. A typical Andersen entry door replacement runs between $900 and $2,800 depending on the line, while a full French or patio door installation starts around $2,400 and goes up from there. You’ll get a written line-item quote before any work begins, and both warranty layers get registered in writing before we leave your driveway.
This page is for Hialeah homeowners who already own Andersen doors or are planning to buy them and want the installation done by a crew that knows the product line by heart. If you’re looking for a cheap install with no questions asked, we’re not your company. If you want the rough opening checked, the door set square, and the warranty honored, call us at (386) 977-5410 and we’ll schedule a free estimate.
How Andersen Products Fail - and How We Fix Them
Andersen builds a solid door. But after two decades in Hialeah heat and humidity, we see the same failure patterns repeat across certain lines. Here’s what actually happens and what we do about it.
- Andersen 400 Series Frenchwood hinged doors binding or sagging. The 400 Series is common in Hialeah homes built in the 1990s and early 2000s. What we find is not a hinge failure but a rough opening that shifted or was never square in the first place. Over time the weight of the panel pulls the top hinge screws, and the door starts dragging on the sill. The fix is not a hinge adjustment. We remove the casing, square the opening with proper shimming, reset the screws into solid framing, and rehang the door so it swings true. That’s the difference between a repair that lasts five years and one that lasts the life of the door.
- Andersen 200 Series storm doors with failed closers and warped panels. Hialeah’s humidity does a number on storm door closers. The piston seals wear out, the closer starts slamming, and eventually the panel itself gets torqued. We replace the closer and check the panel for racking before it becomes an issue. A warped panel can sometimes be saved by remounting; a badly warped one has to be replaced. We’ll tell you which before writing the quote.
- Andersen A-Series and E-Series entry doors with failed weatherstripping and air leaks. These are Andersen’s premium lines, and the doors themselves are well-made. But the weatherstripping takes a beating in South Florida, especially on west-facing doors in Hialeah that catch the full afternoon sun. Once the gasket compresses, you get air leaks, dust intrusion, and higher cooling bills. We replace the stripping with the correct profile for the specific panel, not a universal strip that looks close enough.
- Andersen Perma-Shield doors with failing glass seals. The Perma-Shield line shows up on plenty of older Hialeah houses. When the insulated glass seal fails, you get fogging or condensation between the panes. That’s not a door replacement job. We can order a factory-matched sash insert or reglaze the existing frame depending on the model and age of the door. Some owners assume they need a whole new door; half the time they don’t.
- Improper installations from the original builder or a previous contractor. This is the one we see most. An Andersen door is only as good as the opening it’s set in. If someone shimmed it wrong or did not flash the threshold, you’ll see water stains at the interior corners, sticking in summer, or gaps at the bottom. Dale Kessler grew up a few blocks from Amelia Earhart Park, and he says it plainly: if the opening isn’t square, nothing else matters. We fix the opening first, then set the door.
Our Andersen Door Installation Process
Here’s how a typical Andersen installation goes with us, from your first call to the final walkthrough.
- 1
Call and schedule. A live person answers at any hour. We ask about the door, the symptoms, and the model if you know it. Then we set a time to come look.
- 2
On-site measurement and inspection. We measure twice. Every opening. We check the rough opening for square, the condition of the flashing, the threshold, and the framing around the door. If the door is new and going into a bare opening, we check the header and the subfloor too.
- 3
Parts decision on paper. We show you the options side by side: OEM Andersen parts versus quality aftermarket where it makes sense. We note which choices keep your warranty intact and which don’t. You decide with the full picture in front of you, not after the work starts.
- 4
Installation, done right. We set the door square, shim properly, flash the sill and jambs, and hang the panel so it closes without fighting. No caulk cover-ups, no shortcuts. Our crew is background-checked and uniformed, and they work in your home the way they’d work in their own mother’s.
- 5
Test and register the warranty. Before we leave, we open and close the door repeatedly, check the lock, check the weather seal, and confirm there’s no light or air passing through. Then we register both manufacturer warranty layers in writing, with durations stated, and leave you a copy.
- 6
The Done Right Promise. If it’s not right, we make it right. No paperwork fights, no arguing. You call, we come back.
What Andersen Door Installation Costs in Hialeah
Every Hialeah job is priced after we see the opening, but here are honest ranges for common Andersen installation work.
- Single Andersen entry door install (200 Series or 400 Series): $900 - $2,100
- Andersen A-Series or E-Series entry door install: $1,800 - $2,800
- Andersen Frenchwood double door or hinged patio door install: $2,400 - $4,200
- Storm door replacement (200 Series): $550 - $1,100
- Therma-Tru or Andersen new construction door set in rough opening: $2,800 - $5,500 depending on size and trim package
What moves the price: the condition of the rough opening, whether the jamb and trim need replacing, the width of the unit, and whether you’re choosing OEM parts or a quality aftermarket option. We give you a fixed quote with line items before work begins, and it does not change once the job starts unless you ask for something different. Call (386) 977-5410 for a free estimate and an exact number for your door.
Why Hialeah Homeowners Call TruePane Windows & Doors for Andersen Work
We’ve served Hialeah and the surrounding communities since 2008, and we’ll be here in thirty more. Dale Kessler founded this company on a simple rule: if the pane is not true, the job is not done. That governs every Andersen door we set.
Our technicians know Andersen doors the way a mechanic knows a specific engine. They know which models bind in Hialeah humidity, which thresholds fail first on south-facing exposures, and which aftermarket parts are worth using and which aren’t. We also carry and install Pella, PGT, and CGI, so if an Andersen repair doesn’t make financial sense, we can show you an alternative on paper instead of steering you blind.
Every job is covered by the Done Right Promise. Both manufacturer warranty layers are registered in writing before the truck leaves your driveway. We don’t hand you a stack of fine print and hope you never call back. A live person answers the phone 24 hours a day, 7 days a week. When something goes wrong, we’ll be there when we say.
FAQs
Yes, in most cases. Andersen’s warranty covers manufacturing defects, but the installation has to be done correctly for the warranty to remain valid. A botched install that causes the failure means the claim gets denied. We document every installation and register the warranty layers in writing, which protects you if something fails later. Call (386) 977-5410 if you want the install done warranty-safe from the start.
Most single-door installations are done in one visit, usually four to six hours. Double French doors or a new-construction install can take a full day. If we’re replacing a door in an existing opening and the framing is solid, it’s a same-day job. We’ll give you a firm timeline when we write the estimate.
Usually, yes. Andersen still makes replacement panels and parts for most of their active lines, and for many discontinued models there’s stock available through our parts network. The tricky part is matching color and finish on older doors that have faded in the Hialeah sun. We’ll be honest with you about how close the match will be before you spend a dollar.
If the panel and frame are sound, repair is almost always cheaper. Fogged glass, failed weatherstripping, a bad closer, or a binding hinge are all repairable for a fraction of replacement cost. We replace when the door has structural rot, a badly warped panel, or damage that a repair can’t make right for the long term. We’ll show you the numbers for both options and let you decide.
Yes. We install doors regardless of where you bought them, as long as we can verify the product and confirm it’s appropriate for your opening. We’ll inspect it when we measure. If something’s wrong with the unit before it’s installed, we’ll tell you and help you handle the return.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Hialeah and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.