Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
CGI Window Replacement in Hialeah: What to Know First
CGI window replacement in Hialeah typically runs between $900 and $2,800 per opening, depending on the series, size, and whether we’re doing a full frame replacement or an insert. Most CGI jobs are completed in a single visit, and we quote every job on paper before any work begins. This page is written for Hialeah homeowners who own CGI windows or doors and want straight answers on what fails, what it costs, and how the work should be done.
TruePane Windows & Doors is an independent CGI service provider. We are not affiliated with or authorized by CGI, which means we answer to you, not to a manufacturer’s sales quota. If you have a CGI window that needs attention, call (386) 977-5410 for a free estimate.
Key Takeaways:
- CGI windows fail in predictable ways, most of which are fixable without replacing the entire unit.
- We are an independent CGI service provider, so we recommend replacement only when repair genuinely won’t hold.
- Every job carries the Done Right Promise and The Keystone Standard: both warranty layers registered in writing before our truck leaves your driveway.
- We quote manufacturer lines side by side on paper, including CGI, PGT, Andersen, so you see exactly what you’re buying.
How CGI Products Fail - and How We Fix Them
CGI builds a serious impact window. The frames are heavy, the glass is thick, and the products hold up well in Miami-Dade’s wind load requirements. But no window lasts forever, especially in Hialeah’s climate. Here are the failure modes we see most often on CGI products, and how we address each one.
- Fogged glass on CGI Estate and CGI Sentinel lines. The insulated glass unit (IGU) seals break down over years of heat and humidity cycling. Once the desiccant inside the spacer bar is saturated, condensation builds inside the panes. We replace the IGU, not the whole window, and we register the new glass warranty in writing before we leave.
- Binding sashes on CGI Targa and CGI Estate series. Hialeah’s hot afternoons expand aluminum frames, and a window that wasn’t set square in the rough opening binds in July. We measure the opening twice, check the reveal, and reset the frame or replace the sash as needed. Dale Kessler’s rule: if the opening isn’t square, nothing else matters.
- Worn rollers on heavy CGI sliders. CGI sliding doors and windows carry serious glass weight. The rollers wear out, the track grits up, and the panel drags. We replace rollers with OEM or quality aftermarket parts that match the original load rating, then clean and lube the track. This is a single-visit fix in most cases.
- Degraded weatherstripping and weep system blockages. Older CGI installations in Hialeah neighborhoods like Palm Springs North and West Hialeah often have weatherstripping that’s flattened or missing, plus weep holes clogged by years of dust and landscaping debris. Water that can’t weep out finds its way inside. We clear the weep path and replace the gaskets with materials rated for Miami-Dade’s storm exposure.
- Bent or bowed frames on older CGI fixed units. Impact windows take a beating in a place that sees hurricane-force wind testing every few years. A frame that’s out of square by even a quarter inch stresses the glass and leaks air. We check every frame with a level and a square before recommending repair or replacement, and we won’t caulk over a structural problem.
Our CGI Window Replacement Process
When we replace a CGI window in Hialeah, we follow the same sequence every time. It’s not the fastest way to work. It’s the way we were trained, and it’s the reason our callbacks are rare.
- 1
You call, a person answers. Not a voicemail tree, not a callback form. We listen, ask about the symptoms, and book a time that works for you.
- 2
We measure every opening twice. Before we quote anything, a uniformed technician comes to your home, puts eyes on the window, checks the rough opening, and takes measurements. No shimming tricks, no assumptions.
- 3
We quote on paper, side by side. You’ll see the CGI replacement option alongside comparable lines like PGT, Andersen, with prices and warranty durations stated in writing. You choose what fits your house and your budget.
- 4
We make the parts decision before we start. For glass, we use OEM or IGU-matched replacement units that meet Miami-Dade wind load requirements. For hardware, we match the original load rating rather than install a lighter, cheaper part that will fail in two years.
- 5
We install, test, and register. The new unit goes in square, the weatherstripping is seated, the weep system flows, and the window cycles smooth. Before we leave, both manufacturer warranty layers are registered in writing with the durations stated.
- 6
We clean up and follow up. The site is left the way we found it, minus the old window. If anything isn’t right within 90 days, our Done Right Promise covers it: no paperwork, no arguing.
What CGI Window Replacement Costs in Hialeah
Here’s what Hialeah homeowners can expect to pay for CGI window replacement, based on the scope of work rather than a vague “starting at” number.
| Scenario | Typical Range, Installed | What It Includes |
|---|---|---|
| Single IGU replacement (fogged glass) | $900 - $1,700 per opening | New impact-rated insulated glass unit, glazing, seal, cleanup, warranty registration |
| Insert window replacement (new sash in existing frame) | $1,200 - $2,200 per opening | New CGI or comparable rated sash, hardware, weatherstripping, install, warranty registration |
| Full frame replacement (frame, sash, trim) | $1,800 - $2,800 per opening | Complete tear-out of old frame, new impact-rated unit, setting and sealing, trash haul-off |
| Multi-opening job (3+ windows) | Discounted per opening | Applied at quote before you sign anything |
What moves the price: the condition of the rough opening, the series of your existing CGI product (Estate, Sentinel, and Targa hardware costs differ), the glass package, and whether trim work is involved. Every quote is written, itemized, and fixed: no change orders surprise you halfway through. Call (386) 977-5410 and we’ll come measure and price it for free.
Why Hialeah Homeowners Call TruePane Windows & Doors for CGI Work
We’ve been doing this work a long time. Dale Kessler founded TruePane in 2008, but the trade itself runs deeper: he grew up off West 49th Street in Hialeah, a few blocks from Amelia Earhart Park, and learned measuring and cutting from his father before ever taking a paycheck for it. That’s not marketing copy. That’s why our crews measure twice and why the crew chief’s rule is still “if the pane is not true, the job is not done.”
When you hire us for CGI window replacement, you get a background-checked, uniformed technician who knows the product, a written warranty registration before we leave, and a live person on the phone 24 hours a day if you ever have a question. We also install and service Andersen, Pella, and PGT, so if your home has a mix of brands, we handle all of it rather than sending you to three different contractors. We are an independent CGI service provider, and we plan to be in Hialeah doing this work for another thirty years.
FAQs
No. As an independent CGI service provider, we follow warranty-safe practices on every job: OEM or matched components, proper installation methods, and full documentation. We register both warranty layers in writing before we leave your driveway, so nothing gets left to a phone call later. Call (386) 977-5410 if you want us to look at your specific product.
Yes, in most cases. CGI has changed series designations over the years, and older units sometimes don’t have a direct modern equivalent. We match the glass package, frame profile, and load rating as closely as the market allows, and we’ll show you comparable options from PGT, Andersen, or ViewLux side by side before you commit.
That depends on the failure. Fogged glass is almost always a glass-unit replacement, not a full window replacement. Binding sashes, worn rollers, and weatherstripping failures are also repairable. If the frame itself is bowed or corroded through, replacement makes more sense. We’ll tell you straight which one you need, and we’ll put it in writing.
Most replacement jobs are completed in a single visit once the glass or sash is in our hands. A live person answers our phone 24 hours a day, so when you call (386) 977-5410, you’ll talk to someone who can actually schedule the work, not route you to a mailbox.
Yes. We replace and service CGI sliding doors, swing doors, and fixed units, including the hardware and glass packages. The same processes and guarantees apply: written quotes, OEM or matched parts, warranty registration, and the Done Right Promise.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Hialeah and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After