Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterTrusted Custom Windows & Doors for Hialeah Homeowners
Hialeah Custom Windows & Doors are not a luxury, they are a requirement for any home built before 1994 that predates modern high-velocity hurricane zone code. Homeowners come to us when a standard off-the-shelf window will not fit an existing opening, or when a standard spec simply will not survive another wet season. TruePane Windows & Doors has been installing, replacing, and servicing custom windows and doors in Hialeah since 2008, and Dale Kessler still walks jobs when the opening is out of square. If you are staring at a window that fogs at the corners or a door that only latches from the inside in July, call (386) 977-5410. We will tell you honestly whether you need a replacement or a repair, and the estimate is free.
What Our Custom Windows & Doors Service Includes
Custom Shape Windows
Custom shape windows are the arches, circles, triangles, and hexagons that standard window lines do not produce in stock sizes. Hialeah homes from the 1950s through the 1980s are full of these, especially in the Palm Springs and Sun-Tan Village neighborhoods where mid-century picture windows got decorative arched toppers. We measure the actual rough opening, then order a unit built to the real dimensions of your house, not the dimensions a builder expected fifty years ago. That matters because Hialeah’s humidity will find any gap a sloppy template leaves, and a quarter-inch of air movement around a custom shape window becomes a mold line by August.
Commercial Storefront Glazing
Commercial storefront glazing means the aluminum-framed glass fronts you see on retail shops, offices, and restaurants across East Hialeah and along Palm Avenue. These systems carry more daily abuse than residential work because they are opened, slammed, cleaned, and leaned on by the public from open to close. We install, replace, and rebuild storefront glazing with the same Keystone Standard we apply to a homeowner’s front door: every opening measured twice, every manufacturer warranty registered in writing, and a Done Right Promise behind the workmanship. When a storefront pane cracks in Hialeah, the owner does not wait three weeks for a bid; we quote it straight, install it clean, and the shop stays open.
Curtain Wall Systems
Curtain wall systems are the non-structural glass exteriors found on small commercial buildings, medical offices, and some contemporary custom homes in the Hialeah area. They are called curtain walls because the glass hangs off the structure like a curtain, and that means the anchoring details are what keep the whole assembly square and weather-tight. TruePane technicians set and anchor glass into aluminum mullion grids, then check each glazing pocket for the weep drainage that Hialeah’s 55 inches of annual rainfall demands. If the pane is not true on a curtain wall, the load transfers unevenly and the wall works against itself; that is exactly why Dale’s whiteboard rule applies to every bay we glaze.
Architectural Grilles & SDLs
Architectural grilles and simulated divided lites, or SDLs, give a window the pattern of traditional divided panes without sacrificing the energy performance of a single insulated glass unit. Homeowners choose them when they own a Mediterranean Revival in Country Club or a ranch-style house in Miami Gardens Custom Windows & Doors territory and want the glass to match the architecture rather than fight it. We have three grille profiles available, and we help you pick the one that reads correctly from the curb, not just from the showroom sample. The grilles are placed inside the insulated glass unit on a custom window, which keeps the glass surface smooth and eliminates the dust-trapping channels of exterior mounted muntins.
Oversized Glass Panels
Oversized glass panels are fixed or operable panels that exceed the maximum dimensions of standard residential window products, typically anything over 12 feet in width or 8 feet in height. Hialeah homeowners use them for pool enclosures, atrium walls, and rear elevations facing a patio or garden, where the whole point is the view and the daylight. We handle the extra engineering these panels require: heavier glass makeups, laminated interlayers for impact rating, and tempered sections where code mandates them. The freight, the lift equipment, and the setting technique are all different from a stock window, and a crew that does not do oversized work regularly will find that difference the hard way.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Custom Windows & Doors
We are an authorized installer for windows, and we have been building, setting, and servicing custom units in Hialeah since we opened. Their wood-clad and Fibrex lines show up often in the older neighborhoods where homeowners want to keep a traditional sash profile but need modern hurricane performance. We know the trim kits, the anchoring patterns, and the warranty registration process, and we walk homeowners through the paper side of the purchase before any glass is cut.
We also install and service Best Custom Windows & Doors in Hialeah, FL from Marvin and Pella, two manufacturers whose custom shape programs are among the broadest in the industry. Marvin’s Ultimate series is a frequent choice for Hialeah homeowners who want a true divided lite with a wood interior, and Pella’s Architect Series handles the arched and radius shapes that stop a stock order cold. Whether you have an Andersen, a Marvin, a Pella, or any other make, our team can measure, quote, and install the replacement correctly. We have built enough custom windows to know that the name on the frame matters far less than the name on the installation.
Signs You Need Custom Windows & Doors Right Now
- Fog between the panes. When the seal on an insulated glass unit fails, moisture gets in and the window fogs from the inside where you cannot wipe it. In Hialeah’s humidity, that trapped moisture will rot the sash wood and stain the glass itself if it sits through a summer. Custom windows with odd shapes and oversized panels are the most common candidates for this failure because the seal has more perimeter per square foot than a stock rectangular unit.
- A door that binds in July. Doors that stick in summer and loosen in winter are telling you the frame, the slab, or the house itself has moved. In Hialeah, salt air and heavy rains accelerate the swelling that makes a door catch, and eventually the edge of the slab gets chewed up or the threshold splinters. Custom door replacement lets us size the unit to the actual swung opening, not the drawing.
- Daylight visible around the window frame. If you can see light around the edge of a closed window or door, the weather-stripping or the rough opening seal has failed. That gap means air-conditioned air escaping all year, higher FPL bills, and a ready highway for rain and bugs. Custom windows built to the true opening dimensions close that gap completely.
- Glass that is loose in the frame. A pane that rattles when you press on it or shakes in high wind has already lost its structural contact with the sash. In hurricane season, a loose light is the first thing to blow out. We repair or replace loose glass in custom frames, and we check every glazing bead and setting block when we do.
- Visible rot or rust on the frame. Wood rot and steel rust do not slow down in Hialeah’s climate; once water finds a joint, the frame is being eaten from the inside. If the sill feels soft to a screwdriver tip or the mullion flakes when you run a fingernail across it, the window or door needs full replacement, not painting. We will show you the joint we tested before we quote the job.
Our Custom Windows & Doors Process - Step by Step
- 1
Measure the actual opening. Every job starts with a technician who carries a laser measure and a tape, and who measures each opening twice: once at the rough frame and once at the finished jamb. We are not pulling the manufacturer’s nominal spec and hoping; we are writing down the real numbers of your Hialeah house. If the header has sagged or the jamb has bellied over forty years, we will find it here, not at installation.
- 2
Quote the options side by side on paper. We show you the lines we recommend, the glass makeups that meet high-velocity hurricane zone requirements, and the cost difference between them in writing. Both manufacturer warranty layers are stated on the quote with their durations, and the Done Right Promise is in print with no fine print that covers neither. You choose what fits the house and the budget, and you know exactly what you are buying.
- 3
Order the custom unit. We place the factory order with the exact dimensions, glass spec, grid pattern, and finish you approved. Custom window lead times run six to twelve weeks depending on the manufacturer and the glass makeups, and we will give you a straight answer on the schedule before the order goes in. When the factory acknowledgment comes back, we check every line item against the quote and send you the confirmation.
- 4
Install and register all warranties. On installation day, our background-checked, uniformed team removes the old unit, sets the new custom window or door, and insulates and seals every gap to Hialeah’s wind and rain standards. Before the truck leaves the driveway, both manufacturer warranty layers are registered in writing and the paperwork is in your hand. If the pane is not true, the job is not done, and we do not leave until it is.
- 5
Walk it together. We walk the finished opening with you, operate the door or window, show you the hardware, and answer every question while we are still standing on your property. You will receive the warranty registrations, the line-item invoice, and the Done Right Promise in writing. From that day forward, if something is not right, a live person answers your call and we make it right, the way Dale Kessler has insisted since 2008.
How Much Does Custom Windows & Doors Cost in Hialeah?
Affordable Custom Windows & Doors in Hialeah, FL run from roughly $900 to $3,800 per unit, depending on the shape, size, glass spec, and whether the unit must carry an impact rating. A typical custom arch window in a standard bedroom runs between $1,200 and $2,200 installed, while a large oversized fixed panel with laminated impact glass and a radius top can reach $3,800 or more. Custom doors follow the same pattern: a simple single custom exterior door runs $1,500 to $3,000, and a matched set of custom French or sliding patio doors lands between $3,500 and $8,000, more when the glass package carries high-velocity hurricane certification.
What moves the number most is the glass makeup. Impact-rated laminated glass costs more than standard annealed, and a custom shape with a true divided lite grille cost more than a plain single light. The frame material matters too: wood costs more than aluminum or vinyl, and shop-finished wood costs more than factory-primed wood. The way to avoid overpaying is to ask for side-by-side quotes on paper with the warranty terms written next to each option. That is exactly how we quote every job. Our free estimate includes all measurements, the full written quote, and a straight answer on installation timing. Call (386) 977-5410 and we will send a technician to measure the opening.
Custom Windows & Doors Near Hialeah - Our Service Area
TruePane Windows & Doors serves homeowners throughout Hialeah and the surrounding neighborhoods, including Miami Lakes, Hialeah Gardens, Medley, Miami Springs, Brownsville, Pinewood, West Little River, Westview, Opa-locka, Country Club, and Doral. We have installed custom windows in the mid-century houses of Miami Lakes and the garden-style condos of West Little River, and we know the code differences from jurisdiction to jurisdiction. If you are looking for Custom Windows & Doors in Miami Lakes or Custom Windows & Doors in Hialeah Gardens, the same team handles the work. And for anything else on the window or door side of your home, start at our home page or return to Custom Windows & Doors in Hialeah for this page’s full service.
Serving Hialeah, FL - Our Local Coverage Area
We’re based in the Hialeah area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Custom Windows & Doors in Hialeah
A custom window or door is any unit built to dimensions, shapes, or specifications that fall outside a manufacturer’s standard size chart. In Hialeah, that typically means arched windows, radius tops, oversized fixed panels, or doors sized for openings that do not match modern production stock. We measure the actual rough opening, specify the glass package and frame, and order a unit built to those exact numbers. You get a window or door that fits the opening you have, not one that requires a carpenter to rebuild the wall.
The installation itself usually takes half a day to one full day per opening, depending on the size and how much repair the surrounding frame needs. The lead time on the custom unit is the longer part: most custom windows and doors take six to twelve weeks from order placement to delivery at our shop. We give you the factory schedule in writing before the order goes in, and we confirm the installation date the week before we arrive. Call (386) 977-5410 and we will measure your opening and give you a real timeline, not a guess.
Custom windows in Hialeah run about $900 to $3,800 per unit installed, and custom doors run about $1,500 to $8,000 depending on size, glass spec, and hardware. The biggest cost drivers are impact-rated laminated glass, true divided lite grilles, and wood frame materials. A free estimate from TruePane includes exact measurements, side-by-side manufacturer quotes, and both warranty layers stated in writing with their durations. Call us for a number that matches your actual opening.
Yes, we are an authorized installer for and we regularly install and service custom window and door lines. Our technicians know the anchoring systems, hardware, and warranty requirements of each brand, and we register the manufacturer warranties in writing before we leave the driveway. The brand on the frame matters less than the accuracy of the install, and that is the part we control. If you have a custom unit from any major maker, call (386) 977-5410 and we will tell you what it needs.
If a custom window is broken, a door is jammed shut, or a panel has blown out, call us right away; a live person answers the phone 24 hours a day, 7 days a week, not a voicemail tree. We can board and secure the opening quickly, then begin the custom replacement order that same week. For a non-emergency measure and quote, we will schedule the visit at a time that works for you. Either way, the call goes to a person, not a recording.
The Done Right Promise covers our workmanship for 90 days after installation: if the window or door was not set true, the hardware is out of adjustment, or the seal is not holding, we fix it. There is no paperwork fight, no arguing, and no fine print that covers neither the material nor the labor. The Keystone Standard behind it means both manufacturer warranty layers are registered in writing, with durations stated, before the truck leaves the driveway. If you call within those 90 days with a workmanship problem, we come back and make it right.
Clear the work area inside and out: move furniture, wall hangings, and plants at least four feet away from the opening, and remove anything fragile from the room. Make a clear path from the entry door to the work area, because our team will be carrying glass and tools through the house. Keep small children and pets out of the room on installation day. We handle the drop cloths, the dust control, and the cleanup; you just give us room to work, and we will walk the finished job with you before we leave.
Schedule Your Custom Windows & Doors Service in Hialeah Today
If you have a custom window or door that needs replacement, repair, or a straight answer on cost, call TruePane Windows & Doors at (386) 977-5410. We will measure the opening, quote the options side by side in writing, install it true, and stand behind the work with the Done Right Promise. A live person answers every call, day or night, and the estimate is free. If the pane is not true, the job is not done, and we have not built windows in Hialeah since 2008 by leaving jobs out of true.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Hialeah since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.