Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
CGI Window Installation in Hialeah: What to Know First
CGI window installation in Hialeah typically runs $85 to $145 per opening for a straightforward replacement or new-construction set, with full-home jobs landing between $4,800 and $18,000 depending on the series and how many openings we’re setting. Most single-window installations are done in one visit, and we quote every job on paper before the first screw comes out of the truck. As an independent CGI service provider, we’re not affiliated with CGI, but we’ve installed and serviced their lines across Miami-Dade for the better part of two decades.
This page is written for the homeowner who already has CGI windows, or has decided on CGI, and wants the installation done by a crew that knows how these specific products behave in Hialeah’s heat, salt air, and storm season. If you have questions about a current install or a quote you’ve received, call (386) 977-5410 and you’ll get a live person, not a voicemail tree.
How CGI Products Fail - and How We Fix Them
- CGI Sentinel Series – sash sag at the operator hinge. The Sentinel is a workhorse casement and awning line in Hialeah, but we regularly see the operator arm wear at the pivot after eight to ten years of daily use. The window still locks, so the owner doesn’t notice until the sash drops a quarter inch and starts catching the frame. We pull the sash, replace the operator assembly with an OEM part, and reset the reveal so it closes without dragging.
- CGI Estate Collection – weep system clogging at the sill track. Hialeah’s rainy season fills sill tracks with fine sediment and pollen. The Estate Collection uses narrow weep channels that clog faster than most people expect, and once the water backs up, it moves under the frame and into the drywall at the sill. When we install these, we verify weep function before we set the window, and on service calls we clear and ream the channels before we talk about resealing.
- CGI Targa Series – seal failure at the insulated glass unit. The Targa is a fixed and picture window line that sees direct afternoon sun in Hialeah. We replace more fogged Targa IGUs than any other CGI series because the thermal cycling on the south and west elevations breaks down the desiccant seal early. The fix is a new IGU, properly bedded, with the interior stop removed and reset so the warranty on the glass stays intact.
- CGI Classic Series – frame racking from rough openings that were never squared. The Classic single and double hung is unforgiving of an out-of-square opening. If the rough opening is off by more than a quarter inch diagonally, the frame twists, the sashes bind, and the locks won’t align. We don’t shim-and-pray. We correct the rough opening before the window goes in. That’s the difference between a window that operates for a decade and one that sticks after the first hard rain.
- Aftermarket glass pack fitment errors. Some Hialeah homeowners call us after another company installed an aftermarket IGU that doesn’t match the original thickness. The glass sits loose in the glazing channel, the exterior stops don’t seat, and the window whistles in a stiff breeze. CGI frames are built to specific overall unit thickness. We measure the pocket depth and order the IGU to match, because a glass pack that’s an eighth inch thin will never seal right no matter how much glazing silicone you pump in.
Our CGI Window Installation Process
- 1
The call. You call (386) 977-5410. A live person answers, takes the address, and schedules a time. No forms, no callbacks.
- 2
The opening check. Our technician measures every rough opening twice, checks for square, and looks at the existing flashing, sill condition, and interior trim. If the opening isn’t square, nothing else matters. We fix that first.
- 3
The paper quote. We lay out the CGI series options side by side on paper, including any other lines you want to compare – Andersen, Pella, PGT. You see the numbers before you commit to anything.
- 4
The install. We remove the old unit, correct the rough opening if needed, flash the perimeter properly for Hialeah’s wind-driven rain, and set the new CGI window. Both warranty layers get registered in writing before the truck leaves the driveway.
- 5
The test and walkthrough. We operate every sash, check every lock, run water along the sill if it’s a ground floor, and walk you through what we did. If something’s not true, the job’s not done.
- 6
The follow-through. Every job carries our Done Right Promise. If something’s out of whack, we make it right. No paperwork fights, no arguing.
What CGI Window Installation Costs in Hialeah
Here’s what Hialeah homeowners should expect to pay for CGI window installation, based on the jobs we see most weeks:
- Single casement or awning replacement (Sentinel or Classic series): $85 to $145 per opening, labor only
- Fixed or picture window (Targa series): $110 to $210 per opening, depending on glass size and access
- Single or double hung (Classic series): $95 to $160 per opening
- Sliding window: $120 to $220 per opening
- Bay or bow assembly: $1,800 to $5,400, including structural support and interior trim
- Full home, 10 to 15 openings: $4,800 to $18,000, depending on series, opening condition, and permitting
What moves the price is the rough opening condition, the series you choose, and whether Hialeah’s permitting and inspection requirements apply to the job. We pull permits and pass inspections when the project calls for it, and the cost is in the written quote. Call (386) 977-5410 for a free line-item estimate on your exact windows.
Why Hialeah Homeowners Call TruePane Windows & Doors for CGI Work
We’ve served this community since 2008 through a heritage of craft and community commitment. Dale Kessler, our owner, grew up off West 49th Street in Hialeah a few blocks from Amelia Earhart Park, and he still runs the company by the rule his father taught him: if the opening isn’t square, nothing else matters. We’re not a franchise with a rotating crew. Our technicians are background-checked, uniformed, and trained into journeymen here in Miami-Dade.
We stand behind every CGI install with the Keystone Standard: both manufacturer warranty layers registered in writing, durations stated, before the truck leaves the driveway. The Done Right Promise covers the workmanship. If it’s not done right, we make it right, no fine print. And because we’re authorized installers for more than a dozen lines including, and PGT, we can quote you real alternatives on paper if a CGI repair doesn’t make financial sense. A square deal, in writing, every time.
FAQs
Using an aftermarket insulated glass unit does not automatically void the CGI frame warranty, but the fitment has to be correct. We measure the glazing pocket and order the IGU to match the original thickness so the unit seats properly. When the glass pack is too thin, the stops don’t hold and the window leaks air. Call (386) 977-5410 and we’ll tell you exactly what your windows need.
Most single-window installations are completed in one visit, usually three to five hours including cleanup. A full-home job of 10 to 15 openings typically runs two to four days depending on rough opening conditions and permitting. We’ll be there when we say, and we don’t leave a second appointment hanging.
If the frame is square and the hardware is sound, repair is almost always cheaper than replacement. Fogged glass, worn operators, and clogged weeps are all repairable. Replacement makes sense when the frame has twisted, the glazing channel is cracked, or the rough opening needs correction anyway. We’ll show you both numbers side by side before you decide.
Yes, when the project requires it. Hialeah enforces Florida Building Code requirements for impact-rated window installation, and we pull the permit, schedule the inspection, and make sure the job passes. The cost is included in the written quote you approve before we start.
In most cases, yes. CGI still produces the Sentinel, Estate, Targa, and Classic lines, and we can order a new unit to match the frame profile, glass tint, and hardware finish on your existing windows. If the exact series has been discontinued, we’ll show you the closest available match on paper before you commit to anything.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Hialeah and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After