Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterES Windows Custom & Geometric Windows in Hialeah: What to Know First
Custom and geometric ES Windows installations in Hialeah typically run $1,200 to $4,800 per opening depending on glass package, frame finish, and whether the unit is impact-rated, and most jobs we take on are measured, ordered, and installed within three to five weeks. We’re an independent ES Windows service provider. That means we install and service the product line without being tied to the manufacturer’s sales channel, which changes how honestly we can talk about both its strengths and its failure points.
This page is for the Hialeah homeowner who already owns ES Windows, or who’s been quoted ES Windows for a shaped opening and wants to know what they’re actually buying before writing a check. If you have an arched transom that’s fogged, a radius window that won’t seat, or a custom geometric unit you can’t get a straight answer on, call us at (386) 977-5410. We answer the phone.
How ES Windows Products Fail - and How We Fix Them
- Radius sash warping on pre-2015 aluminum line. Older ES aluminum frames used a thinner outer wall on curved extrusions. After enough Hialeah summers, the extrusion memory wants to return to straight stock, and the sash begins to lift at the mullion joint. We shim the rough opening, remount the anchors, and reset the unit before ordering any replacement parts, because a new sash in the same bowed opening will fail the same way within two years.
- Fogged insulated glass in octagon and trapezoid units. ES uses a dual-seal spacer system, but the secondary seal on shaped glass is a hand-laid bead, not an automated line. When the bead runs thin at a corner, moisture finds its way in, and the argon bleeds out. In Hialeah’s humidity, that fog never dries on its own. We replace the IGU and have it heat-sealed at a local fabricator, then verify the gas fill with a calibrated fill gauge before reinstall.
- Operator crank failures on the ES venting casement line. We see the ES series venting casement in a lot of Hialeah ranch houses built in the 1990s. The worm gear inside the operator is zinc, and after fifteen years in a salt-adjacent climate, it corrodes until the crank slips. The manufacturer’s replacement operator is the right call here, but we’ve also installed Fasco units that outlast the OEM part. Warranty paperwork tells us which way to go.
- Hinge pin drift on oversized arched units. Arched and curved windows taller than 72 inches carry a lot of dead weight on the top hinge. ES specifies a specific hinge gauge for these, and when an installer swaps in a lighter hinge to save money, the sash starts sagging within the first wet season. We see it often enough that it’s one of the first things we check. The fix is a hinge upgrade to spec, not a shim under the glass.
- Leak failures at the floor anchor on picture windows with radius corners. ES picture windows use a channeled floor anchor that’s sealed against the rough opening with a butyl tape. On full-sun south-facing walls in Hialeah, that tape bakes, shrinks, and pulls away. Water works its way in along the anchor’s back edge, and by the time the homeowner notices a stain on the drywall, the rot is behind the plaster line. We pull the unit, remediate the opening, and re-seal with a marine-grade butyl that holds in this climate. We don’t caulk it and call it a day.
Our ES Windows Custom & Geometric Windows Process
- 1
Call and talk. You reach a person, not a menu. We ask questions: what size is the opening, when was the window installed, what’s the symptom you’re seeing. If it’s a repair candidate, we schedule a visit. If it’s a replacement, we tell you that on the phone.
- 2
Measure the opening twice. If the opening isn’t square, nothing else matters. That’s the rule on Dale Kessler’s whiteboard, and it’s the first thing our technician checks with a laser level and a tape. Shaped openings in Hialeah homes built before 1980 are rarely true, and we measure for that reality, not the blueprint.
- 3
Quote manufacturer lines side by side on paper. If the ES line fits your budget, we quote ES. If a PGT or CGI or CWS unit does the same job for less without losing the warranty, we show you that too. We’re not authorized ES Windows sales reps. We don’t have a quota to hit.
- 4
Order with the warranty registered before install. Both manufacturer warranty layers get registered in writing before the truck leaves the driveway. Durations are stated on the paperwork you keep. That’s The Keystone Standard, and it’s non-negotiable.
- 5
Install, test, and walk the job with you. The unit goes in true, level, and anchored. We operate it through the full range, check the seal with a smoke pencil on the interior, and hand you the warranty card. The job isn’t done until you see it done.
- 6
If it isn’t right, we make it right. The Done Right Promise means no paperwork fights and no arguing. It’s in writing. It has been for the life of the company.
What ES Windows Custom & Geometric Windows Costs in Hialeah
You asked what it costs in Hialeah, not in Orlando, and we’ll answer that honestly. A single replacement IGU for a fogged ES arched transom runs $380 to $650 installed. A full radius window replacement, framed and glazed, runs $1,200 to $2,800 if the opening is standard-size. Custom geometric units, octagon to eyebrow, run $2,000 to $4,800 when the opening needs re-framing. Impact-rated glass adds 35 to 45 percent on most shaped units because the laminate is cut and edge-polished by hand.
Prices move based on glass package, finish, whether we’re re-framing the rough opening, and whether the unit needs scaffolding or lift rental on a second-story wall. You’ll get the line-item quote on paper before you commit. Call (386) 977-5410 and we’ll schedule a free estimate at your house in Hialeah.
Why Hialeah Homeowners Call TruePane Windows & Doors for ES Windows Work
We’ve been serving this community since 2008, carrying Dale Kessler found out of principle in 2008 that out-of-true installs and voided warranties were problems worth fixing permanently, not just patching. He grew up off West 49th Street in Hialeah, a few blocks from Amelia Earhart Park, and the company still runs like a local shop, not a franchise playbook. Our technicians are background-checked, uniformed, and trained to work in your home the way they’d work in their own mother’s.
We service the ES line without a sales attachment, and we also work with PGT, CGI, CWS, and ECO Window Systems, which means you get an honest answer when another line suits your shaped opening better. A live person answers the phone 24 hours a day. The warranty is registered in writing before we leave. And if the pane is not true, the job is not done.
FAQs
Yes, in most cases. ES powder-coat and anodized finishes are matched by submitting a physical chip from the existing frame to the supplier’s coating lab, not by trusting a paint code from a 1998 brochure. For older white frames that have yellowed, we’ll match to the current color of the frame, not the original. Call (386) 977-5410 and we can confirm whether your finish is matchable during the free estimate.
We handle warranty-adjacent issues as an independent provider, which means we can document the failure, provide the evidence the manufacturer needs, and install approved replacement parts. We’re not the warranty administrator. What we will do is register every active warranty layer in writing and hand you the paper with the durations stated, so you know exactly what’s covered before any work begins. Call (386) 977-5410 with your model number and we’ll help you make sense of the coverage.
The insulated glass unit is replaceable without replacing the entire sash in nearly all ES shaped windows. The IGU is set into the frame with a removable glazing bead, so we de-glaze, replace the sealed glass, and re-install the unit in place. You don’t pay for a new frame when the frame is fine. Call (386) 977-5410 for an exact quote on your specific opening.
Straight repairs like an IGU replacement or a hinge fix are often done in a single visit, usually within two hours. Full custom replacements run three to five weeks from measurement to install because shaped glass is fabricated to the opening, not pulled from a warehouse rack. We’ll give you the delivery window on the written estimate, and we’ll be there when we say.
Call TruePane Windows & Doors for Your ES Windows Custom & Geometric Windows in Hialeah
If you own ES Windows that aren’t performing, or you’re planning a shaped opening and want a straight answer before you spend five figures, call us. We’ll measure, quote on paper, register the warranty, and stand behind the work in writing. Dale Kessler and the crew have been doing this in Hialeah long enough to know that the cheapest bid on a radius window is rarely the last bill. Call (386) 977-5410 to schedule your free estimate.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Hialeah and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.