Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterTherma-Tru Roof Replacement & Installation in Hialeah: What to Know First
We install and replace Therma-Tru doors and entry systems across Hialeah, and the honest answer on timing is this: a standard Therma-Tru entry door replacement runs one day, while a full frame-and-threshold rebuild with rot repair typically takes two. Pricing in Hialeah for Therma-Tru work ranges from $1,400 for a basic slab swap to $4,800 for a complete frame rebuild with brickmould and sill pan replacement. If you own a Therma-Tru product that’s failing, call (386) 977-5410 and we’ll tell you what you’re actually looking at before anyone schedules a visit.
This page is for Hialeah homeowners who bought a Therma-Tru door years ago and have watched it slowly stop closing right, or bought a house with one already installed and inherited whatever the last contractor left behind. We’re an independent Therma-Tru service provider, not a factory arm, which means we fix what’s actually wrong instead of reading from a corporate script.
How Therma-Tru Products Fail - and How We Fix Them
Therma-Tru makes a solid door, but every product line has failure patterns that show up again and again across Hialeah. Here’s what we see in the field:
- Fiber-Classic and Smooth-Star slab warping at the lock stile. These fiberglass skins are tough, but Florida humidity plus direct sun on a west-facing entry can make the slab bow just enough that the deadbolt no longer lines up with the strike plate. We see this constantly in Hialeah’s older neighborhoods like Palm Springs North and Miami Lakes. The fix is a full slab replacement, not shimming the hinges into a contortion. Shimming masks the warp for a season; it comes back worse.
- Tru-Defense door bottom sweeps shredding in Hialeah heat. The rubber compounds Therma-Tru uses on their adjustable sills and sweeps break down faster in South Florida UV than the manufacturer’s testing suggests. Homeowners notice water and roaches coming in under the door and assume the frame is shot. Usually the frame is fine; the sweep has turned brittle and lost contact with the sill.
- Rot at the bottom corners of the frame on pre-hung units. Whoever installed the original door in a Hialeah home often skipped the sill pan or caulked over the brickmould instead of flashing it. Water wicks into the frame corners, and within five to seven years the corner joints soften. Therma-Tru warranties cover manufacturing defects, not install rot, which is why we rebuild the rough opening properly before the new frame goes in.
- Lost factory finish on Classic-Craft Mahogany Collection doors. These doors look great off the truck, but the factory finish doesn’t hold up to Hialeah’s afternoon thunderstorms and salt air the way it does in Ohio. Homeowners call us thinking the door itself failed when the real issue is finish delamination. We strip, prep, and refinish with marine-grade products, then register the new finish documentation for warranty purposes.
- Adjustable sill channels clogging with Hialeah’s fine limestone dust. Hialeah sits on limestone, and construction dust from the endless local remodels works its way into the sill track’s weep holes. Water backs up, then runs under the threshold into the floor. This one looks like a plumbing leak to homeowners and usually gets misdiagnosed twice before someone pulls the threshold cap.
Our Therma-Tru Roof Replacement & Installation Process
Here’s how a Therma-Tru job runs with our crew, from first call to final walkthrough:
- 1
Diagnostic visit and measurement. We measure the rough opening, check the floor for settlement, and pull the threshold cap to inspect the sill pan if we suspect water intrusion. Dale Kessler’s rule from childhood still holds: if the opening isn’t square, nothing else matters. We tell you on the spot whether you need a slab swap, a frame rebuild, or a full opening correction. No charge for the visit when you proceed with the work.
- 2
Parts decision on paper. We quote OEM Therma-Tru parts side by side with quality aftermarket options when they exist. For sill pans, sealing systems, and frame components, we’ll show you both columns and explain the trade-off: OEM preserves the warranty path; aftermarket sometimes fits better or outlasts the factory part in this climate. You decide with real numbers in front of you.
- 3
Removal and rough-opening inspection. Old door comes out, and we open the drywall around the jamb if there’s any sign of rot or termite tracks. Hialeah’s older homes hide surprises here, and we’d rather find them now than warranty a door over a compromised opening.
- 4
Frame rebuild or slab install. For frame rebuilds we set a proper sill pan, flash the brickmould with aluminum, and shim the jamb to true before the slab ever hangs. For slab swaps we reuse the existing frame only when it’s solid and square. We don’t set new fiberglass into an out-of-true frame. That’s how you get a door that binds in July.
- 5
Adjustment, sealing, and test. Hinges tuned, sweep adjusted to the sill, deadbolt and handle tested from inside and out. We open and close the door a dozen times, check the reveal gap on all four sides, and run water over the threshold to confirm drainage.
- 6
Warranty registration before we leave. Both manufacturer warranty layers get registered in writing on the spot, with durations stated on the paperwork we hand you. The Done Right Promise covers everything else: if it’s not right, we come back and make it right, no paperwork fights, no arguing.
What Therma-Tru Roof Replacement & Installation Costs in Hialeah
Real numbers for Hialeah, not national averages. Here’s what Therma-Tru work runs in this market:
- Slab swap on existing solid frame: $1,400 to $2,200 depending on door model and hardware
- Full frame rebuild with new sill pan and flashing: $2,800 to $4,000
- Complete entry system replacement with sidelites: $4,200 to $6,800
- Finish strip and marine-grade refinish (Classic-Craft): $600 to $1,000
- Adjustable sill and sweep replacement: $350 to $600
What moves the price: whether the rough opening is sound or needs correction, which Therma-Tru line you’re matching, whether we’re fighting termite damage or past water intrusion, and how much finish work the entry needs. We quote everything in writing before work starts, and the number on the quote is the number on the bill. Call (386) 977-5410 for a free estimate, and we’ll give you exact numbers for your specific door, not a range from a brochure.
Why Hialeah Homeowners Call TruePane Windows & Doors for Therma-Tru Work
TruePane Windows & Doors has worked Hialeah’s entryways since 2008 through Dale Kessler’s hands, and his father’s before him going back to the garage door frames off West 49th Street. That’s not nostalgia; that’s a company that knows it’ll be here in thirty years because it’s already been here for four decades. Every Therma-Tru door we set is covered by the Done Right Promise, which is exactly what it sounds like: if it’s not done right, we make it right.
If a Therma-Tru product isn’t the right answer for your opening, we’ll tell you that too. We also install and service PGT, CGI, CWS, and ES Windows, so we’re in a position to recommend what actually works for a Hialeah entry rather than what we happen to have in the warehouse. We show you manufacturer lines side by side on paper, both warranty layers registered in writing before the truck leaves the driveway, and a live person answers the phone at (386) 977-5410 whenever you call.
FAQs
Yes, provided the failure is covered under the manufacturer’s terms. We’re an independent Therma-Tru service provider, not a factory-authorized installer, but our work follows the manufacturer’s installation specifications so your warranty path stays intact when we use OEM components. We register both warranty layers in writing before we leave, and our Done Right Promise covers workmanship regardless of what the manufacturer decides.
A slab swap on a sound frame is a single-day job. Full frame rebuilds with sill pan replacement run two days, and entry systems with sidelites take two to three days depending on opening condition. We schedule the work before we order parts, so you know the date before we start. Call (386) 977-5410 and we’ll give you a specific timeline for your opening.
That depends on whether the frame is still square and dry. If the slab is warped but the frame is solid and the sill drains properly, a slab swap gets you another fifteen years for less money. If the frame corners are soft, the sill is filling with water, or the opening has settled, patching is wasted money and you’ll be calling someone else in eighteen months. We’ll open it up and show you exactly what you’re working with either way.
In Hialeah, it’s usually the adjustable sill’s weep holes clogged with limestone dust, or a threshold cap that lost its seal against the frame. Less often it’s the sweep, and rarely it’s an actual frame leak. We pull the cap and check drainage first, because replacing a $400 sill assembly over a clog that took ten minutes to clear is the kind of waste that gives this trade a bad name. Estimates are free, and the diagnosis visit is too when you proceed with the repair.
No. Registering both warranty layers in writing is part of the job, not an add-on line item. The Keystone Standard means the paperwork in your hand states exactly what’s covered and for how long before we leave Hialeah for the day. If you have questions about your existing Therma-Tru warranty, bring the documents and we’ll walk through them with you at no charge.
When you’re ready to get your Therma-Tru door working right, call (386) 977-5410. We’ll schedule a free estimate, measure the opening, and give you honest numbers on paper, no pressure and no surprises.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Hialeah and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.