Double Hung Windows

Double Hung Windows in Hialeah, FL | TruePane Windows & Doors

Double hung windows give Hialeah homeowners the classic vertical-glide operation they want, built around the impact protection Florida buildings actually need. Both the top and bottom sashes move, and both tilt inward for cleaning, which makes them a favorite on two-story homes and anywhere you’d rather not climb a ladder. TruePane Windows & Doors installs impact-rated double hung windows across Hialeah, Miami Lakes, and the surrounding Miami-Dade corridor, with frames and glass matched to your specific wind zone. We carry this configuration in our PGT, CGI, CWS, ES Windows, ECO, and Mr-Glass product lines. Call (386) 977-5410 to schedule a free on-site measurement.

Call (386) 977-5410

Product Overview - Double Hung Windows

Double hung windows are the traditional profile that still dominates Hialeah’s older ranch homes, 1960s courtyard houses, and the Mediterranean-influenced builds that line streets near Hialeah Park. The vertical-glide design lets you open the top sash, the bottom sash, or both at once, giving you ventilation control that fixed picture windows or single hungs simply don’t offer. On a humid Hialeah afternoon, cracking the top sash lets hot air escape high, while the bottom sash pulls in the cooler evening breeze. Both sashes tilt into the room, so you can clean the exterior-facing glass from inside your house, something anyone with a second-story bedroom window will appreciate immediately.

In hurricane-prone Miami-Dade, though, the reason to choose this product has less to do with convenience and more to do with engineering. The impact series version replaces standard annealed glass with laminated impact glass, held by a PVB interlayer that keeps the pane intact if debris hits it. The frame construction carries that protection through the entire assembly, not just the glass. Aluminum and vinyl are the two frame options we order most for Hialeah homes. Aluminum gives you the slimmest sightlines and resists corrosion well in coastal air when properly finished. Vinyl runs cooler to the touch and insulates the frame against heat transfer, which matters when your west-facing wall takes the full Hialeah afternoon sun.

TruePane Windows & Doors installs this window with HVHZ discipline on every job. We verify the design pressure rating against your specific wind zone before we order, so you’re not paying for a rating you don’t need, and you’re not getting a window that falls short of what your block requires. The classic profile means double hungs fit naturally into older openings without forcing a modern architectural look onto a house that was never built for it.

Technical Specifications

Here’s how the impact double hung windows we order for Hialeah projects are configured. Every line has its own manufacturing tolerances, but these are the options we work with across the TruePane Windows & Doors product range.

• Frame materials: Aluminum and vinyl. Aluminum powder-coated finishes hold up to salt air and heavy sun. Vinyl frames offer lower heat transfer through the frame itself.
• Glass options: Laminated impact glass with PVB interlayer, Low-E insulated glass, tinted glass, or clear glass. Laminated impact glass is the foundation. Low-E and tinted coatings layer onto that for heat control and glare.
• Color and finish options: White, almond, bronze, black, and tan. Interior and exterior colors can be matched separately when the line allows, which is helpful on HOA-governed homes in Hialeah where the exterior finish is specified.
• Screen options: Half screen or full screen. Half screens cover the bottom sash only, which is the standard for double hung windows. Full screens span the whole opening if you want airflow protection while both sashes are open.
• Design pressure: Matched to your wind zone, up to +/−100, never higher. We verify what your home actually needs before ordering.

Hurricane & Compliance Performance

Impact double hung windows earn their place on a Hialeah home through a specific set of compliance and performance requirements. Here’s what each layer means in practical terms.

Laminated Impact Glass
The glazing uses a PVB (polyvinyl butyral) interlayer laminated between glass layers. When a windborne object strikes, the glass may crack, but the interlayer holds the pane in the frame. The opening stays sealed, which stops wind and rain from pressurizing the interior during a storm. That’s the entire point of impact protection, and it’s the primary difference between these windows and standard double hungs.

Miami-Dade NOA / Florida Product Approval
Each configuration carries a Miami-Dade Notice of Acceptance and Florida Product Approval number. These are issued per configuration, so we confirm the exact approval documents on your specific quote before you sign. Your permit submittal in Hialeah will reference these numbers, and we provide them to your contractor or permit expediter.

FBC / HVHZ Compliance
These windows are engineered to Florida Building Code High-Velocity Hurricane Zone requirements. HVHZ is the stricter code applied across Miami-Dade and Broward counties. A window that meets HVHZ standards is tested and built for the wind conditions Hialeah actually experiences, not just the minimum required in central or north Florida.

TAS 201 / TAS 202 / TAS 203 Testing Context
HVHZ-rated products are tested under the TAS protocol family. TAS 201 covers large-missile impact, meaning the window takes a direct hit from a heavy object. TAS 202 covers cyclic wind-pressure loading, which simulates the repeated push-pull of hurricane-force gusts over time. TAS 203 covers forced-entry resistance, which matters for home security long after storm season ends.

Design Pressure for Your Wind Zone
We match design pressures to your Hialeah wind zone, up to +/−100, and never higher. A higher number is not automatically better for your home. The rating your house needs depends on building height, exposure category, and the specific opening location. We evaluate that on site so your windows are spec’d correctly, without overspending on ratings your structure doesn’t require.

Energy Performance
Low-E and insulated glass options build on the impact layer to cut heat transfer. An insulated impact unit with a Low-E coating reduces how much of Hialeah’s heat makes it through south- and west-facing glass. Tinted glass handles glare on rooms that get direct afternoon sun. The energy package is a choice, not a performance claim, and we’ll walk you through the tradeoffs on your quote.

Color & Glass Options

The finish choices on impact double hung windows run through white, almond, bronze, black, and tan. Hialeah’s housing stock spans a lot of architectural ground, from bright stucco ranches to the terra-cotta and barrel-tile Mediterranean influenced homes that anchor neighborhoods between Palm Avenue and Okeechobee Road. White and almond remain the most common choices on those homes because they recede into the wall and keep the focus on the architecture. Bronze and black have gained ground on modern and Spanish-influenced remodels, particularly where homeowners have already replaced roof tiles or garage doors with darker tones. Tan works well on earth-toned stucco.

For glass, clear laminated impact glass preserves the truest light and exterior color. Low-E insulated glass is the choice when the window faces south or west and the room overcooks by late afternoon. Tinted glass reduces glare without the reflective look, which suits bedrooms and living rooms where sunlight hits screens all day. The laminated impact layer stays in every option. The energy and tint choices layer on top and can be combined where the line allows.

Installation by TruePane Windows & Doors in Hialeah

An NOA-rated window system only performs as rated if the installation holds the frame exactly where it was engineered to sit. That’s the part of an impact window purchase that no spec sheet covers, and it’s where Hialeah installations frequently go wrong when untrained crews rush the job.

Every double hung installation by TruePane Windows & Doors starts with a pre-install inspection of the rough opening. We check the existing framing, look for rotted or compromised wood, and confirm the new window will seat level, plumb, and square. A window set out of square binds at the sashes and compromises the weather seal, which defeats the design pressure rating on the first windy day.

Our crews set each unit to AAMA 2400/2410 installation practice. The perimeter gets a low-expansion AAMA 812 foam sealant before interior and exterior trim go back on. That foam does two jobs: it keeps water and air from channeling around the frame, and it allows the wall assembly to move without transferring stress into the window extrusion. After the window is set, we run a water test on the opening and inspect the interior for any moisture intrusion before we call the job complete.

Permitting matters in Hialeah. The city enforces HVHZ code on window replacement, and your permit submittal must include the correct NOA or Florida Product Approval documents for the exact window configuration you’re installing. We prepare that paperwork as part of the project, because a window installed without the right approvals becomes a problem if the home is ever inspected for sale or refinance. If your home has coastal exposure, we account for the higher wind zone requirements that apply to east-facing elevations and any opening within the defined windborne debris zone.

Frequently Asked Questions - Double Hung Windows

What wind zone or design pressure are the double hung windows rated for?
Design pressure is matched to your specific Hialeah wind zone, up to +/−100, and never higher. The correct rating depends on your building height, exposure category, and the location of each opening on the façade. We verify the required pressure rating during the on-site measurement and order to that spec exactly.

What is the lead time for impact double hung windows?
Lead time runs on the manufacturer’s production schedule for the specific line, glass package, and finish you choose. Custom colors and Low-E insulated configurations typically add production time. We’ll give you a firm ship date when we place the order, and we’ll keep you updated if the factory moves the date. Call (386) 977-5410 and we’ll check current lead times on the lines we carry.

Does my Hialeah permit require a Miami-Dade NOA or Florida Product Approval submittal?
Yes. Hialeah building permits for impact window replacement require the NOA or Florida Product Approval documents that correspond to the exact window configuration being installed. These are issued per configuration, so we match the approval number to your specific size, glass, and frame choice. We prepare those documents as part of your project submittal.

Can I customize the size or configuration of my double hung windows?
Most dual-glide double hung windows are sized to your rough opening within the manufacturer’s approved range. The approvals are issued per configuration, so any size change means verifying the NOA or Florida Product Approval number for that specific dimension. We’ll confirm any custom sizing against the approval documents before we order, and we’ll flag anything that falls outside the approved range so you can make an informed call. Call (386) 977-5410 to talk through your specific openings.

How do I maintain the frame and the sashes?
Keep the bottom track clear of dirt and debris, and wipe down the frame with mild soap and water twice a year. Salt air near the coastline settles on window surfaces, so homes closer to the beach benefit from more frequent rinsing. The tilt-in sashes make cleaning the exterior glass simple from inside the house. If a sash ever feels stiff or off-balance, don’t force it; call us and we’ll inspect the balance mechanism before a small issue becomes a broken part.

Get a Quote - Double Hung Windows in Hialeah

If you’re replacing windows in Hialeah or building a new home here, start with a free on-site measurement from TruePane Windows & Doors. We’ll verify your wind zone, measure your openings, walk you through the glass and finish options, and prepare a written quote with the approval documents you need for permitting. Call (386) 977-5410 to schedule yours.

Written by the team at TruePane Windows & Doors, serving Hialeah, FL since day one.